Mobile Mark Antenna Solutions Surface Mount Antenna 2.4GHZ ORBITAL P/N. 120091-2

Description

BRAND NEW
MOBILE MARK COMMUNICATIONS ANTENNAS
RM_900, RM3-900/1900, RMMSERIES,
RM3-2400,-4900, -5500
Surface Mount Antenna
Wideband 1.7-6.0 GHz
• Mounts easily to roof, trunk or bulkhead
• Ground plane independent omni  configuration
• Rugged and attractive ASA radome,
available in thru-hole, mag mount or
Direct N Female
• Wideband model operates over 1.7 - 6
GHz with excellent linear performance
These antennas lead the industry with efficient, wideband coverage
from 1.7-6.0 GHz.
The stud mount style can be mounted to any vehicle, container or
bulkhead. The rugged design is excellent for industrial applications,
yet attractive for consumer use. Magnetic mount versions offer semi-
permanent or noninvasive installation options.
Antenna performance is 3 or 5 dBi gain (frequency dependent) for
the RM Series, with no ground plane required for proper operation.
The antennas can even be mounted on fiberglass or plastic housing
and meet electrical specifications.
The RM Series antenna radome consists of Black or White ASA UV
stable plastic with a heavy metal base and threaded feed-thru. The
bottom mounting plate is outfitted with a gasket for a watertight seal.
The MGRM style is a mag mount version of the RM.  It utilizes the
same housing as the RM series, with a powerful rare earth magnet
for secure mobile applications.  The magnet bottom is outfitted with a
protective vinyl cover, to prevent marring of the vehicle surface.
The wideband models RM-WHF & MGRM-WHF can operate over the
entire frequency range of 1.7-6 GHz.  These wideband models can be
used for 802.11 a/b/g/n, AWS, WIMAX, 4.9 Public Safety and DSRC
82-9680     RM-WHF-DN-BLK
Surface Mount 3 dBi 1.7-6 GHz N Jack
Specifications
Frequency: 1.7-6 GHz
Gain: 5 dBi @ 1650-2000 MHz
3 dBi @ 2100-6000 MHz
VSWR: 2:1 max over range
Operating Temp: -40o to +85o C
Nominal Impedance: 50 ohms
Maximum Power: 10 watts
RM Radome/Mount: 1.75” diameter x 3” high
(45 mm x 76 mm)
MGRM Mag Size: 1 6/8” diameter x 3 5/8” high
(43 mm x 92 mm)
Mag Base, 2 5/8”D (67 mm)
Case Material: ASA plastic, UV Stable
RM Hardware:
Nut, lockwasher
RM Mounting:
3/4” L stud (19 mm)
5/8” diameter (16 mm)feed thru
for 1/2” thick surface(12.7 mm
RM-WHF-DN:
Direct N Jack (Female)
RM Cable:
RF-195, 1 foot (305 mm)
Pigtail Connector:
SMA Plug (Male), standard
MGRM  Mag Cable:
RF-195 & SMA Plug
RM Series Options:
Pole & Wall Mount adapter
White radome for RM/MGRM
Shock & Vibration:
EN 61373, IEEE 1478, MIL-810G
TIA-329.2-C
Water Ingress:
RM: IP67, MGRM: IPx5
PLEASE CONTACT ME IF YOU HAVE ANY QUESTIONS...AND THANK YOU FOR LOOKING.