PortaPack Porta Pack + Hack RF One SDR 0.5PPM TXCO GPS Simulator+ Case + Antenna

Description

PortaPack Porta Pack + Hack RF One SDR 0.5PPM TXCO GPS Simulator+ Case + Antenna
Description
The hackrf one is inlcuded
Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, 0.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case.
Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware)
According to source code: github.com/sharebrained/portapack-hackrf
Redesign this hardware and share it to the enthusiast.
Progress of work:
1. has completed the program validation prototype.
2. the latest 2018.10 month documents are based on improvements.
The PortaPack is open-source -- hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports are welcome!
Specification of PortaPack
- 2.4 inch, 240 x 320 RGB LCD with resistive touch panel.
- Four-way arrow keys, rotary jog wheel, and select button.
- Headphone/microphone jack
- Coin battery for preserving settings and date/time.
- Micro SD card slot for data and code storage.
- Aluminum case
SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.
Wideband (18MHz) spectrum analysis and waterfall.
Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
HackRF mode runs HackRF firmware for use with host computer SDR software.
PPM calibration for more accurate tuning.
Sleep mode saves power by turning off just the display.
You may also find the Furrtek HAVOC firmware very interesting!
Some assembly is required. The assembly steps are documented in the support wiki and videos.
Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".
PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.
Specification of Hackrf one:
half-duplex transceiver
operating freq: 1 MHz to 6 GHz
supported sample rates: 2 Msps to 20 Msps (quadrature)
resolution: 8 bits
interface: High Speed USB (with USB Micro-B connector)
power supply: USB bus power
software-controlled antenna port power (max 50 mA at 3.3 V)
SMA female antenna connector (50 ohms)
SMA female clock input and output for synchronization
convenient buttons for programming
pin headers for expansion
portable
open source
Package :
1pc PortaPack Porta Pack
1pc
Hack RF One SDR
1 x Antenna
1 x USB cable
The hackrf one is inlcuded
Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, 0.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case.
Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware)
According to source code: github.com/sharebrained/portapack-hackrf
Redesign this hardware and share it to the enthusiast.
Progress of work:
1. has completed the program validation prototype.
2. the latest 2018.10 month documents are based on improvements.
The PortaPack is open-source -- hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports are welcome!
Specification of PortaPack
- 2.4 inch, 240 x 320 RGB LCD with resistive touch panel.
- Four-way arrow keys, rotary jog wheel, and select button.
- Headphone/microphone jack
- Coin battery for preserving settings and date/time.
- Micro SD card slot for data and code storage.
- Aluminum case
SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.
Wideband (18MHz) spectrum analysis and waterfall.
Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
HackRF mode runs HackRF firmware for use with host computer SDR software.
PPM calibration for more accurate tuning.
Sleep mode saves power by turning off just the display.
You may also find the Furrtek HAVOC firmware very interesting!
Some assembly is required. The assembly steps are documented in the support wiki and videos.
Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".
PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.
Specification of Hackrf one:
half-duplex transceiver
operating freq: 1 MHz to 6 GHz
supported sample rates: 2 Msps to 20 Msps (quadrature)
resolution: 8 bits
interface: High Speed USB (with USB Micro-B connector)
power supply: USB bus power
software-controlled antenna port power (max 50 mA at 3.3 V)
SMA female antenna connector (50 ohms)
SMA female clock input and output for synchronization
convenient buttons for programming
pin headers for expansion
portable
open source
Package :
1pc PortaPack Porta Pack
1pc
Hack RF One SDR
1 x Antenna
1 x USB cable
Shipping
Item will be shipped within 24 -48 hours after full payment is received.
Normally the shippment to worldwide is used to take 25 to 30 business days, exclude Sat & Sun.
Payment
We accept PayPal only.
Payment must be received in 7 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
Any special request cannot be accepted after 24 hours of payment,because most of orders will be processed instantly and same day dispatched.
Contact Us
If you have any questions, please feel free to email our servicer ，and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven't received item in 45 days, please contact us and we will arrange refund or resend
Feedback
Customer satisfaction is very important to us. If you have any problem with your order,please contact us and we will do our best to make you satisfied, please do not leave a negative feedback before we resolve your problem.
We guarantee that your issue will be solved quickly.
As long as you are happy with your purchase of , please leave us a positive feedback.
Your feedback is very important to us it affects our search placement on eBay. We will leave a positive feedback for you in return automatically once we receive your feedback