TANNING BED - PCB - ERGOLINE CONTROL BOARD #JK10552/6 LATE 1980's - EARLY 1990's

Description

JK ERGOLINE
LATE 1980's to EARLY 1990's
PCB CONTROL BOARD
#JK 10552/6
MEASURES:  7 3/8" L  x  3 1/8" W  x  1" HEIGHT
LIGHTLY USED
PLEASE NOTE: There are 2 of these in stock. There are some slight differences between them. For example, one has an orange dip switch block, while the other is black. Please carefully review the photos for this listing & select the board that is closest in appearance to the one that you will be replacing. Then simply email us which one, based on the dip switch block color & that's the one we'll send.
NOTE: Never attempt to connect this Printed Circuit Board (PCB) while the device, in which the board is being installed, is plugged in.  Also, always be sure to first determine if this Circuit Board is the proper match for your device.
The Buyer shall be fully responsible for any incorrect applications or misuse of the PCB Timercard
herein.  Seller makes no warranties as to the product's usage.
IMPORTANT: Before making this purchase, please be sure that this PCB board is the right model & is what's required to make your JK Ergoline bed functional.  We do not offer returns unless an absolute
defect
can be demonstrated & the PCB Control Board is returned exactly as it was received.  This Control Board has been previously tested and is known to be in working condition.
We're sorry, but we do not accept returns on new products, unless an indisputable defect or misrepresentation is present.  We carefully evaluate all products before they ship, and we have maintained a 100% Feedback rating so you can buy with confidence.
Thank-you.