The Best High Performance Super Master Rebuild Kit for GM 4L60E 4L65E 1997-2003

Description

4L60E 4L65E 1997-2003 SUPER MASTER REBUILD KIT HD HIGH PERFORMANCE KOLENE STEELS ZPACK
Precision International 1993-2003 4L60E 4L65E Overhaul Kit with Piston Lip Seals and Farpak Pan Gasket
Raybestos 700R4 4L60E Z-Pack High Performance 3-4 Clutch Enhancement Pack
Raybestos 4L60E High Performance Kolene Steel Module
Raybestos 700R4 4L60E Pro Series Kevlar Heavy Duty 2-4 Band
Super Heavy Duty Aftermarket Sun Gear Reaction Shell
700R4 4L60E High Performance Corvette 2-4 Servo
4L60E Master Bushing Kit (13 Bushings)
4L60E Master Thrust Washer Kit w/ 4 Selective Washers
High Quality Deep 4L60E Filter
4L60E Low/ Reverse Clutch Pack
4L60E Forward Clutch Pack
4L60E Reverse Input Clutch Pack
4L60E OverRun Clutch Pack
Container of Soft (Blue) Assemblee Goo (16 oz)
This
4L60E Transmission Overhaul Kit with Lip Seals
, manufactured in the United States by Precision International, includes the basic seals, gaskets, o-rings and filters necessary to rebuild GM 4L60E transmissions from 1993-2003.
Benefits of Precision International Overhaul Kits from Global Transmission Parts
High Grade Material Construction
.  Unlike other transmission kit manufactures, Precision International’s overhaul kits contain parts made from high quality rubber & fiber materials.
Precision International Kits are
Made in the USA to superior quality standards, which ensure the parts you will receive meet or exceed the OEM specifications
.  So, when you rebuild your transmission using a Precision International overhaul kit you are rebuilding your transmission to better then factory specs.
Precision International kits are
packaged friendly for the rebuilder
.  You won’t just be receiving a bag of parts when you order one of our kits.  The parts in our kits are well packaged, which means less time wasted searching for something you think should be there that isn’t.
Always Stocked in Our Warehouse & Ready to Ship!
Detailed Listing of Parts this 4L60E / 4L65E Overhaul Kit Contains
Upper Valve Body Gasket, 1993-2000 (OEM # 8681603)
Lower Valve Body Gasket, 1993-2000 (OEM # 8681606)
Upper Valve Body Gasket, 2001-UP (OEM # 24211920)
Lower Valve Body Gasket, 2001-UP (OEM # 24211921)
Valve Body Check Ball Set of 8 (OEM # 8631975)
Metal Clad Front Pump Oil Seal (OEM # 24202535)
Oil Pan Gasket – Cork or Farpak (OEM # 8642360)
Pump Bolt O-Ring Kit (PI SUB-K3301 / OEM # 8654341)
Electrical O-Ring & Filter Seal Kit (PI SUB-K3302)
Accumulator Piston O-Ring Kit (PI SUB-K3303)
Piston Lip Seal Kit (PI SUB-K3304)
Pump Filters & Screens (PI SUB-K3305)
2-4 Servo Inner & Outer Housing O-Ring Kit (PI SUB-K3307 / OEM #’s 8642112 & 8647351)
Transmission Cooler Seal & Output Shaft Snap Ring Kit (PI SUB-K33101A)
Pressure Manifold Seal Kit (PI SUB-K3318)
Force Motor & Shift Solenoid Filter Screen Kit (PI SUB-K33768 / OEM #’s 8683768 & 8683769)
2-4 Servo Spring Kit (PI SUB-K33799A / OEM # 8654391)
Upgraded TCC Regulator Valve Spring (PI SUB K-33799B)
Teflon Sealing Ring Kit w/ 11 Rings (PI SUB-K33901E)
Pump Outside O-Ring
4WD Extension Housing O-Ring
2WD Extension Housing O-Ring
Pump to Case Gasket (PI # 33702A)
2WD Extension Housing Oil Seal (PI # 8850A)
4L60E/4L65E Specific Rebuild Technical Sheets
Recommended Torque Specs
Bolt Information
Electrical Resistance
Valve Body Check Ball Locations
Solenoid Chart
Precision International is a worldwide supplier of quality products for import and domestic automatic transmissions. As well as supplying an extensive aftermarket customer base, Precision International also provides products to Original Equipment Manufacturers (OEMs). Precision International is dedicated to providing the highest quality product that meets or exceeds the manufactures recommended specifications.  This means when you use a Precision International Overhaul Kit on when rebuilding your transmission, you are using the finest rebuild kits on the market today.
This 4L60E steel module has been engineered for
high performance
by Raybestos Powertrain.  Raybestos Powertrain GM 4L60E Kolene steel clutch plates are
high quality engineered high performance products
.  Kolene is a salt bath nitriding process.  In generic terms, it is thermochemical diffusion process, whereby ferrous parts are processsed in molten salt with a specific nitrogen potential.  In other words,
Raybestos 4L60E Kolene steels provide a surface treatment that enhances wear and fatigue resistance from 200% to 500%
.
Advantages of Raybestos Powertrain's 4L60E Kolene Steel Module
Enhances wear resistance 200% to 500%
Enhances fatigue resistance 200% to 500%
Higher heat resistance
Increased lubricity
Surface treated
Engineered for high performance
Superior clutch durabliity
When you pair this high performance steel moduel with a
high energy 4L60E friction module
, you are putting the highest quality parts available at one of the lowest costs found online.
3-4 Z-Pak
™
Clutch System
700R4 | 4L60 | 4L60E
1988-UP
Takes the Heat Without Coning
Instructions Included!
ZPak
™
single sided clutch system w/ the revolutionary X-32
™
friction material outperforms both single-sided and double-sided original equipment clutch assemblies in torque capacity,
durability
and
heat resistance
.
7 Steps to Ultimate Clutch Performance
Use a 1988 or later input drum, identified by narrow snap ring groove and a 0.093'' 3-4 snap ring.
Used only a 3-4 apply ring measuring 3.675'' +/- 0.005'' inches tall, commonly referenced as a Number 7 apply ring.  This stamped steel ring rests on top of the 3-4 piston.  The number '7' is stamped into the part for identification.  The OEM number is 8685043.
Pre-soak all friction plates in automatic transmission fluid (ATF) prior to final assembly.
First, install the special grooved apply plate (bottom) with the groove facing upward.  Do not attempt to install the narrow external spline friction plate, with "TOP" printed on it, into the machined groove.  Set it aside until Step 6.
Install the friction plates, beginning with an external spline friction plate with friction material facing upward (away from the special grooved apply plate), then an internal spline friction plate with friction material facing upward, continue alternating until you  have installed seven external spline friction plates and seven internal spline friction plates.
Important!
Install the special external spline friction plate, identified by the narrow band of friction material, with the word "TOP" facing up.  This eternal spline plate does not look like any of the others.  It is critical to install this plate last.  Using it anywhere else in the pack will damage the clutch pack and void the warranty. NOTE:  Use of load release springs is optional.  Use of load release springs recommend for RPM above 5000.
Finally, install the .145'' pressure plate provided, followed by the factory snap ring.  Clearance should be within the 0.050''-0.07'' range.  If not, install optional external spline shim to adjust clearance to 0.050''-0.070'' if necessary.  It is recommenced to check actual piston travel by placing a dial indicator on the backing plate and apply air to the third clutch feed.  If clearance is measured with feeler gauges, it is important to measure in two places at the same time, 180 degrees apart, for even loading of the pressure plate.  Failure to do so may cause incorrect end play reading.
2-4 Band, Raybestos, Pro Series High Energy, 700R4/4L6OE/4L65E (1987-Up)
With a Pro Series High Energy 2-4 Band for a 700R4/4L60E/4L65E made by Raybestos, you know you have nothing to worry about.  The
High Energy
friction coating has been proven to
wear less
and
last longer
than the OEM 2-4 band.  This means you can rest easy knowing that inferior parts aren't going to cut your rebuilt transmissions life short.  The Pro Series 2-4 Band paired with a Corvette Servo Assembly (by OMS, LLC, item #
1091
), makes for a high performance combination that will speed your shifts up dramatically!
Features
Greater mechanical strength
Higher co-efficient of friction competitors' high-energy bands
Heat-treated anchors for added strength on specific applications
Made in the U.S.A.
Benefits
Resistance to extreme heat (up to 700º F)
A significant increase in durability
Higher holding capacity
Stable when exposed to high-energy conditionas
Affordable performance for every rebuild
Reduced risk of overheating steel plates
Kolene is a registered trademark of the Kolene Corporation
HD Reaction Shell
This is an extra heavy duty washer style sun shell that is an aftermarket upgrade over the OEM sun shell in GM's 700R4 and 4L60E transmissions.  The OEM 700R4/4L60E sun shell is a weak point in the transmission and is recommended to be upgraded on the rebuild.
About Us
Global Transmission Parts specializes in providing high-performance GM automatic transmission parts.
We service a wide customer base that ranges from professional remanufactures to the casual rebuilder.  Our Central Ohio location gives us the ability to provide one day standard ground parcel service to all of
Ohio, most of
Indiana
and
West Virginia, plus parts of
Michigan,
Pennsylvania,
Kentucky
and
Virginia.
The entire East Coast, Great Plains states and
Texas
are within standard two day ground shipping of our main facility.
Our mission to provide customers a superior buying experience combined with our ability to deliver orders quickly and accurately, at an affordable price, makes Global Transmission Parts a leader in the online automatic transmission parts retail market.
Return Policy
We accept returns and will refund the purchase price within 14 days of shipment.
Buyer pays return shipping.
Once the item is returned to us, and we will refund your purchase within 1-2 business days.
Please contact us before shipping back your item to receive an RMA (Return Material Authorization) number.  We are unable to process returns for items we receive back without an RMA number.
All returns should be packaged properly using the original box and packaging so that the part is not damaged. All damage incurred during return shipment is the buyer’s responsibility; we insure all our shipments and recommend you do the same when returning your item.
Shipping Policy
All items ship within 1 day upon receipt of order and payment.
Items are shipped via FedEx, UPS, or USPS or an LTL carrier.
Tracking data is transmitted to the buyer upon creation of shipment.
Contact us immediately if you receive a damaged item, so that we can file a claim with the carrier.  Please be prepared to provide photos of the damaged item and packaging for us to submit to the carrier.
FREIGHT SHIPMENTS: Contact us for a quote before purchasing/bidding on all items that must be shipped using a freight carrier because of it's weight or size.  We make every effort to make the delivery of large parts to your home or business affordable.  So, we work hard finding the best rate for your situation and charge you what we are being charged. There are no hidden shipping charges.  We do not make money on freight.